What occasions are tapered pins and cylindrical pins used for?
In mechanical equipment, pins are mainly used for assembly and positioning and can also be used for connections between parts, overload shear connections in relaxation level safety devices, or locking other firmware. There are many types of pins; the main types are cylindrical pins, tapered pins, hole pins, cotter pins, safety pins, etc. The basic forms of pins are cylindrical pins and tapered pins. Both cylindrical pins and cylindrical pins are very common in daily life. What is the difference in function between the two? When should I use a cylindrical pin and when should I use a tapered pin? This article summarizes for you as follows:As the name suggests, taper pins are conical pins. The column pin is a cylindrical taper pin.
The difference between cylindrical and tapered pins in function:
1. The shape is different. As the name implies, the conical pin is a conical pin, and the conical pin is actually a frustum: that is, the top of the cone is truncated by a plane parallel to the bottom surface, and a "circle body" with one end large and the other small is obtained. The pins are then cylindrical.
2. The processing is different. Cylindrical pins can be pre-processed, and tapered pins are usually matched.
3. Cylindrical pins are often suitable for precise positioning (processing first). Cylindrical pins can only bear a small load, so they are not suitable to disassemble frequently, while conical pins are easy to install and self-locking, and the impact of multiple disassembly on positioning accuracy is compared Small, so taper pins are often used in places where disassembly is frequent.
4. Cylindrical pins can resist shearing, and conical pins are often used for positioning.
5. The scope of action is different. Cylindrical pins are mainly used for positioning and can also be used as coupling pins and safety pins. Tapered pins are also used for positioning and can be used as coupling pins. Although cylindrical pins and tapered pins are just one word different, they can be quite different in production, processing and functions. What they have in common is that both are designed and customized for industrial needs. play an important role.
